Differences

This shows you the differences between two versions of the page.

--- installingoncentos5 [2008/11/20 08:14]
spunkmeyer
+++ installingoncentos5 [2010/02/22 14:58]
rogeraas Firmanavn fikset
@@ Line 1: / Line 1: @@
 ====== Installing NAV on CentOS 5 ======
-  * Maintained by Roger Aas at Ementor Norge AS.
+  * Maintained by Roger Aas at Atea AS.
 <code>
 ###
@@ Line 7: / Line 7: @@
 ### for CentOS 5
 ###
-### Roger Aas, Ementor Norge AS
+### Roger Aas, Atea AS
 ###
 ###
+### 22.02.2010:
+###   - NAV version is 3.5.5
+###   - Fixed some minor problems
+### 26.01.2010:
+###   - Tested on CentOS 5.4 i386 DVD
+###   - NAV version is 3.5.4
+###   - FCGI-0.68, CGI.pm-3.48, psycopg2-2.0.13, IPy-0.70, setuptools-0.6c11, pyrad-1.2, Django-1.1.1
+### 10.09.2009:
+###   - Tested on CentOS 5.3 i386 DVD
+###   - NAV version is latest 3.5.4
+###   - Many changes since 3.4
 ### 26.08.2008:
 ###   - Fixed several small issues
@@ Line 21: / Line 32: @@
 ###
 ### For feedback please contact me on the NAV mailing list or directly
-### at <roger at hsh.no>
+### at <roger.aas at atea.no>
-# NB!
+# Important information about site specific information that is needed:
 #
 # There are a lot of site specific information that you have to put in
@@ Line 31: / Line 42: @@
 # put in all the correct information. I have added information about
 # this site specific information in each section header that will need it.
@@ Line 36: / Line 48: @@
 ### Installation of CentOS 5
 ###
-# I have included a very basic installation of CentOS 5 here.
+# I have included a very basic installation of CentOS 5 from DVD here.
 # I have selected to do a "minimal" install and rather do an up2date or yum
 # for the extra packages NAV needs in addition to that. That way I don't get
 # a lot of services running on the machine that I don't need. I use static
 # network configuration so the NAV server don't need to rely on a DHCP
-# server functioning. I disable SELinux.
+# server functioning.
-#
-# WARNING! If you choose to use SELinux here you MUST do some configuration
-# of that to get NAV to work.
 #
 # Site-specific:
@@ Line 50: / Line 59: @@
 #   hostname.yourdomain.tld
 #   gateway ip-address
-#   dns server ip-addresses
+#   dns server ip-address(es)
+#   root password
 #
-# Boot from CentOS 5.2 i386 DVD
+# Boot from CentOS 5.4 i386 DVD
 # "Boot:", press Enter
 # "CD Found", select Skip
-# Screen 1: "Welcome"
+# Screen 1: "CentOS"
-#   "CentOS 5", press Next
+#   Press Next
 # Screen 2: "Language Selection"
 #   Press Next
@@ Line 67: / Line 77: @@
 #   or if your situation needs it select
 #    (a) if you want to remove all previous partitions on selected drives
-#    (b) which drives you want to use
+#    (b) if you want to encrypt system
-#    (c) if you need any advanced configuration
+#    (c) which drives you want to use
-#    (d) if you want to modify the defaults
+#    (d) if you need any advanced storage configuration
+#    (e) if you want to review and modify partitioning layout
 #   Window 1: "Warning"
 #     Press Yes
@@ Line 93: / Line 104: @@
 #   Remove DVD and press Reboot
+# Firstboot configuration
+#
+# WARNING! If you choose to use SELinux here you MUST do some configuration
+# of that to get NAV to work. You are on your own.
+#
 # Firstboot:
 #   Select "Firewall configuration"
-#   Run Tool ()
+#   Press Run Tool
-#     Security Level: Disabled
+#     Select Security Level: Disabled
-#     SELinux: Disabled
+#     Select SELinux: Disabled
-#     OK
+#     Press OK
-#   Exit
+#   Press Exit
@@ Line 111: / Line 127: @@
 ##
 chkconfig autofs off        # Don't need automounting filesystems in this setup
+chkconfig avahi-daemon off  # Don't need Zeroconf service discovery in this setup
 chkconfig cups off          # Don't need printing directly on the NAV server
 chkconfig gpm off           # Don't need a console mouse
-#chkconfig mcstrans off      # No SELinux on this machine
+chkconfig mcstrans off      # No SELinux on this machine
 chkconfig mdmonitor off     # No software RAID in this setup
 chkconfig netfs off         # I will not use any Network FS in this setup
@@ Line 123: / Line 140: @@
 ##
-## Other services that depends on the machine you use for NAV
+## Other services that depends on the hardware of the specific machine you use for NAV
 ##
 ## Check the syslog and other log files to see if they are needed f.ex.:
@@ Line 163: / Line 180: @@
 ##
-## Update installed packages
+## Update installed packages to newest versions
 ##
 # Check available updates
@@ Line 227: / Line 244: @@
 #  yourlogemail@yourdomain.tld
 #
-# We use a SMART_HOST server that we want the mail to go through.
-# And I set up root's email to go to a specified email address.
+# We use a SMART_HOST server that we want outgoing mail to go through.
+# If you do not use that you can skip this part
+# Start of smart host setup
 # Install sendmail-cf
 yum -y install sendmail-cf
@@ Line 236: / Line 255: @@
 make -C /etc/mail
 cd
+# Restart sendmail
+service sendmail restart
+# End of smart host setup
+# Decide who gets the mail to the root user (system logs etc.)
 echo "root: yourlogemail@yourdomain.tld" >>/etc/aliases
 newaliases
-service sendmail restart
@@ Line 268: / Line 291: @@
 ##
-## Configure syslog to accept syslog messages from other hosts
+## Configure syslog to accept syslog messages from external hosts
 ##
 sed -e '/SYSLOGD_OPTIONS/s/m 0/m 0 -r/' -i /etc/sysconfig/syslog
@@ Line 359: / Line 382: @@
 ##
 ## Log in with your new user and become root
-## Root access is needed for installing and configuring NAV
+## Root privileges is needed for installing and configuring NAV
 ##
 su -
@@ Line 365: / Line 388: @@
 ##
-## Install and configure Apache, mod_ssl, mod_python and php:
+## Install and configure Apache, mod_ssl and mod_python:
 ##
 #
@@ Line 384: / Line 407: @@
 #
 # Install Apache
-yum -y install httpd mod_ssl mod_python php
+yum -y install httpd mod_ssl mod_python # php (PHP NO LONGER NEEDED)
 # Remove autocreated cert and make a new certificate.
 rm -f /etc/pki/tls/certs/localhost.crt
@@ Line 393: / Line 416: @@
 # I guess NAV4 should be out before that... :-)
 # Enter your own data in the cert creation.
-openssl req -new -key /etc/pki/tls/private/localhost.key \
+cat << EOF > openssl.conf
- -x509 -days 3652 -out /etc/pki/tls/certs/localhost.crt
+[ req ]
-NO
+default_bits           = 1024
-Rogaland
+distinguished_name     = req_distinguished_name
-Haugesund
+prompt                 = no
-Ementor Norge AS
-hostname.yourdomain.tld
+[ req_distinguished_name ]
-webmaster@yourdomain.tld
+countryName            = NO
+stateOrProvinceName    = Rogaland
+localityName           = Haugesund
+organizationName       = Atea AS
+organizationalUnitName = Haugesund
+commonName             = atealinux.haugesund.kommune.no
+emailAddress           = roger.aas@atea.no
+EOF
+openssl req -new -key /etc/pki/tls/private/localhost.key \
+ -x509 -days 3652 -out /etc/pki/tls/certs/localhost.crt -config openssl.conf
 chmod go-rwx /etc/pki/tls/certs/localhost.crt
 # Enable httpd to start on boot
@@ Line 444: / Line 475: @@
 ##
 yum -y install gcc
-yum -y install postgresql postgresql-server postgresql-jdbc php-pgsql
+yum -y install postgresql postgresql-server postgresql-jdbc # php-pgsql
 yum -y install postgresql-devel # Checked out, psycopg needs it to compile
 yum -y install mx # Checked out, psycopg needs it to compile
 yum -y install python-devel # Checked out, psycopg needs it to compile
 yum -y install perl-DBI # Checked out, AlertEngine needs it [Engine.pm]
-yum -y install perl-DBD-Pg # Checked out, AlertEngine needs it
 yum -y install perl-libwww-perl # Cricket needs it?
 yum -y install db4-devel # Checked out, DB_File needs it to compile
@@ Line 455: / Line 485: @@
 yum -y install samba-client # Arnold uses nmblookup
 yum -y install pkgconfig # python-gammu needs it to install
-yum -y install ant
 yum -y install autoconf
 yum -y install perl-TimeDate
-yum -y install tomcat5
+yum -y install ant
@@ Line 467: / Line 495: @@
 ##
-## Make download directory
+## Make download/source directory
 ##
 mkdir ~/nav3
@@ Line 476: / Line 504: @@
 ## Download NAV source tar and extract it
 ##
-wget http://ans.hsh.no/home/roger/nav3/nav-3.4.2.tar.gz
+wget http://www.pannekake.net/nav/nav-3.5.5.tar.gz
-tar xvzf nav-3.4.2.tar.gz
+tar xvzf nav-3.5.5.tar.gz
@@ Line 483: / Line 511: @@
 ## Install Java Developer Kit
 ##
-wget http://ans.hsh.no/home/roger/nav3/jdk-6u7-linux-i586-rpm.bin
+wget http://www.pannekake.net/nav/jdk-6u18-linux-i586-rpm.bin
-bash jdk-6u7-linux-i586-rpm.bin
+bash jdk-6u18-linux-i586-rpm.bin
  yes
 # Fix the alternatives system to use new JDK
-alternatives --install /usr/bin/java java /usr/java/default/bin/java 1607
+alternatives --install /usr/bin/java java /usr/java/default/bin/java 16180
-alternatives --install /usr/bin/javac javac /usr/java/default/bin/javac 1607
+alternatives --install /usr/bin/javac javac /usr/java/default/bin/javac 16180
 # Set environment variables for Java used for installation
 export PATH=/usr/java/default/bin:$PATH
@@ Line 499: / Line 527: @@
 mkdir JavaSNMP
 cd JavaSNMP
-wget http://ans.hsh.no/home/roger/nav3/source_1.4.2.zip
+wget http://www.pannekake.net/nav/source_1.4.2.zip
 unzip source_1.4.2.zip
 make SNMPPackage
@@ Line 508: / Line 536: @@
 ## Use GPG-key for installing RPMs from Dag Wieers
 ##
-wget http://ans.hsh.no/home/roger/nav3/RPM-GPG-KEY.dag.txt
+wget http://www.pannekake.net/nav/RPM-GPG-KEY.dag.txt
 gpg --import RPM-GPG-KEY.dag.txt
 rpm --import RPM-GPG-KEY.dag.txt
@@ Line 516: / Line 544: @@
 ## Install gammu
 ##
-wget http://ans.hsh.no/home/roger/nav3/gammu-1.11.0-1.el5.rf.i386.rpm
+wget http://www.pannekake.net/nav/gammu-1.11.0-1.el5.rf.i386.rpm
 rpm -ivh gammu-1.11.0-1.el5.rf.i386.rpm
-wget http://ans.hsh.no/home/roger/nav3/gammu-devel-1.11.0-1.el5.rf.i386.rpm
+wget http://www.pannekake.net/nav/gammu-devel-1.11.0-1.el5.rf.i386.rpm
 rpm -ivh gammu-devel-1.11.0-1.el5.rf.i386.rpm
@@ Line 525: / Line 553: @@
 ## Install rrdtool version 1.0 (1.2 is not supported in py-rrdtool)
 ##
-wget http://ans.hsh.no/home/roger/nav3/rrdtool-1.0.50-3.el5.rf.i386.rpm
+wget http://www.pannekake.net/nav/rrdtool-1.0.50-3.el5.rf.i386.rpm
 rpm -ivh rrdtool-1.0.50-3.el5.rf.i386.rpm
-wget http://ans.hsh.no/home/roger/nav3/perl-rrdtool-1.0.50-3.el5.rf.i386.rpm
+wget http://www.pannekake.net/nav/perl-rrdtool-1.0.50-3.el5.rf.i386.rpm
 rpm -ivh perl-rrdtool-1.0.50-3.el5.rf.i386.rpm
-wget http://ans.hsh.no/home/roger/nav3/rrdtool-devel-1.0.50-3.el5.rf.i386.rpm
+wget http://www.pannekake.net/nav/rrdtool-devel-1.0.50-3.el5.rf.i386.rpm
 rpm -ivh rrdtool-devel-1.0.50-3.el5.rf.i386.rpm
@@ Line 538: / Line 566: @@
 # Checked out, cricket/compile needs it
-wget http://ans.hsh.no/home/roger/nav3/SNMP_Session-1.12.tar.gz
+wget http://www.pannekake.net/nav/SNMP_Session-1.12.tar.gz
 tar xvzf SNMP_Session-1.12.tar.gz
 cd SNMP_Session-1.12
@@ Line 547: / Line 575: @@
 # MD5 CPAN Perl module
-wget http://ans.hsh.no/home/roger/nav3/MD5-2.03.tar.gz
+wget http://www.pannekake.net/nav/MD5-2.03.tar.gz
 tar xvzf MD5-2.03.tar.gz
 cd MD5-2.03
@@ Line 556: / Line 584: @@
 # Checked out, cricket/compile needs it
-wget http://ans.hsh.no/home/roger/nav3/DB_File-1.817.tar.gz
+wget http://www.pannekake.net/nav/DB_File-1.820.tar.gz
-tar xvzf DB_File-1.817.tar.gz
+tar xvzf DB_File-1.820.tar.gz
-cd DB_File-1.817
+cd DB_File-1.820
 perl Makefile.PL
 make
@@ Line 565: / Line 593: @@
 # FCGI CPAN Perl module
-wget http://ans.hsh.no/home/roger/nav3/FCGI-0.67.tar.gz
+wget http://www.pannekake.net/nav/FCGI-0.68.tar.gz
-tar xvzf FCGI-0.67.tar.gz
+tar xvzf FCGI-0.68.tar.gz
-cd FCGI-0.67
+cd FCGI-0.68
 perl Makefile.PL
 make
@@ Line 574: / Line 602: @@
 # CGI CPAN Perl module
-wget http://ans.hsh.no/home/roger/nav3/CGI.pm-3.40.tar.gz
+# Warning: prerequisite Test::More 0.8 not found. We have 0.62.
-tar xvzf CGI.pm-3.40.tar.gz
+wget http://www.pannekake.net/nav/CGI.pm-3.48.tar.gz
-cd CGI.pm-3.40
+tar xvzf CGI.pm-3.48.tar.gz
+cd CGI.pm-3.48
 perl Makefile.PL
 make
@@ Line 583: / Line 612: @@
 # Checked out, bin/makecricketconfig.pl needs it
-wget http://ans.hsh.no/home/roger/nav3/pgsql_perl5-1.9.0.tar.gz
+wget http://www.pannekake.net/nav/pgsql_perl5-1.9.0.tar.gz
 tar xvzf pgsql_perl5-1.9.0.tar.gz
 cd pgsql_perl5-1.9.0
@@ Line 599: / Line 628: @@
 #
-wget http://ans.hsh.no/home/roger/nav3/psycopg-1.1.21.tar.gz
+wget http://www.pannekake.net/nav/psycopg-1.1.21.tar.gz
 tar xvzf psycopg-1.1.21.tar.gz
 cd psycopg-1.1.21
@@ Line 610: / Line 639: @@
 make
 make install
+cd ..
+#
+wget http://www.pannekake.net/nav/psycopg2-2.0.13.tar.gz
+tar xvzf psycopg2-2.0.13.tar.gz
+cd psycopg2-2.0.13
+python setup.py install
 cd ..
 # Checked out, machinetracker.py needs it
-wget http://ans.hsh.no/home/roger/nav3/IPy-0.62.tar.gz
+wget http://www.pannekake.net/nav/IPy-0.70.tar.gz
-tar xvzf IPy-0.62.tar.gz
+tar xvzf IPy-0.70.tar.gz
-cd IPy-0.62
+cd IPy-0.70
 python setup.py install
 cd ..
 # Checked out, servicemon needs it
-wget http://ans.hsh.no/home/roger/nav3/py-rrdtool-0.2.1.tar.gz
+wget http://www.pannekake.net/nav/py-rrdtool-0.2.1.tar.gz
 tar xvzf py-rrdtool-0.2.1.tar.gz
 cd py-rrdtool-0.2.1
@@ Line 627: / Line 663: @@
 # Needs version 2 of pysnmp
-wget http://ans.hsh.no/home/roger/nav3/pysnmp-2.0.9.tar.gz
+wget http://www.pannekake.net/nav/pysnmp-2.0.9.tar.gz
 tar xvzf pysnmp-2.0.9.tar.gz
 cd pysnmp-2.0.9
@@ Line 634: / Line 670: @@
 # Checked out
-wget http://ans.hsh.no/home/roger/nav3/Cheetah-1.0.tar.gz
+wget http://www.pannekake.net/nav/Cheetah-2.2.1.tar.gz
-tar xvzf Cheetah-1.0.tar.gz
+tar xvzf Cheetah-2.2.1.tar.gz
-cd Cheetah-1.0
+cd Cheetah-2.2.1
-python setup.py install
-cd ..
-#
-wget http://ans.hsh.no/home/roger/nav3/forgethtml-cvs-2004-10-21.tar.gz
-tar xvzf forgethtml-cvs-2004-10-21.tar.gz
-cd forgethtml
 python setup.py install
 cd ..
 # thresholdMon.py
-wget http://ans.hsh.no/home/roger/nav3/forgetSQL-0.5.1.tar.gz
+wget http://www.pannekake.net/nav/forgetSQL-0.5.1.tar.gz
 tar xvzf forgetSQL-0.5.1.tar.gz
 # Patch it with patch from NAV source
-cp nav-3.4.2/contrib/patches/forgetSQL-0.5.1.patch forgetSQL-0.5.1/lib
+cp nav-3.5.5/contrib/patches/forgetSQL-0.5.1.patch forgetSQL-0.5.1/lib
 cd forgetSQL-0.5.1/lib
 patch <forgetSQL-0.5.1.patch
@@ Line 659: / Line 688: @@
 # Install Python bindings for gammu
-wget http://ans.hsh.no/home/roger/nav3/python-gammu-0.20.tar.gz
+wget http://www.pannekake.net/nav/python-gammu-0.20.tar.gz
 tar xvzf python-gammu-0.20.tar.gz
 cd python-gammu-0.20
+python setup.py install
+cd ..
+#
+wget http://www.pannekake.net/nav/setuptools-0.6c11.tar.gz
+tar xvzf setuptools-0.6c11.tar.gz
+cd setuptools-0.6c11
+python setup.py install
+cd ..
+#
+wget http://www.pannekake.net/nav/pyrad-1.2.tar.gz
+tar xvzf pyrad-1.2.tar.gz
+cd pyrad-1.2
+python setup.py install
+cd ..
+#
+wget http://www.pannekake.net/nav/Django-1.1.1.tar.gz
+tar xvzf Django-1.1.1.tar.gz
+cd Django-1.1.1
 python setup.py install
 cd ..
@@ Line 669: / Line 719: @@
 ## Compile and install NAV
 ##
-export CLASSPATH=/root/nav3/JavaSNMP/snmp.jar:/usr/share/java/tomcat5-servlet-2.4-api.jar
+export CLASSPATH=/root/nav3/JavaSNMP/snmp.jar
-cd nav-3.4.2
+cd nav-3.5.5
 autoconf
-./configure
+./configure CRICKETDIR=/usr/local/nav/cricket/cricket
 make
 make install
@@ Line 720: / Line 770: @@
 export JAVA_HOME=/usr/java/default
 export PATH=\$JAVA_HOME/jre/bin:\$PATH
-export CATALINA_OPTS="-Djava.awt.headless=true -Xmx128M -server -Djava.ext.dirs=/usr/local/nav/lib/java"
 EOF
@@ Line 730: / Line 779: @@
 ##
 ln -s /usr/share/java/postgresql-jdbc.jar /usr/local/nav/lib/java
 ##
@@ Line 750: / Line 800: @@
 cat << EOF > /usr/lib/python2.4/site-packages/sitecustomize.py
 import sys
-sys.path.append('/usr/local/nav/lib/python')
+__navpath = "/usr/local/nav/lib/python"
+if __navpath not in sys.path:
+    sys.path.append(__navpath)
 EOF
-##
-## Configure Tomcat
-##
-# Let Tomcat only listen to the localhost address
-sed -e 's/port="8080"/port="8080" address="127.0.0.1"/' -i /etc/tomcat5/server.xml
-# Link in the NAV servlets
-ln -s /usr/local/nav/apache/webapps/*.war /var/lib/tomcat5/webapps
-chkconfig tomcat5 on
@@ Line 768: / Line 811: @@
 #
 # Site-specific:
-#   nav user password
+#   navdbpassword
 #
-# Start postgres (also on boot)
+# Start postgres when the machine boots and now
 chkconfig postgresql on
 service postgresql start
-# Configure postgres with net authorization
+# Configure postgres with correct net authorization
 sed -e 's/^local/#local/' -i /var/lib/pgsql/data/pg_hba.conf
 sed -e 's/^host/#host/' -i /var/lib/pgsql/data/pg_hba.conf
@@ Line 787: / Line 830: @@
 # Become postgresql admin
 su - postgres
-# Create a NAV DB user and set a password on it
+# Use NAV script to make db user with password, make and init nav db
-# Select n for no so the account can not create more roles
-createuser --no-createdb --no-adduser --pwprompt nav
-# Set up the NAV databases
-createdb --owner nav --encoding UTF-8 manage
-createdb --owner nav --encoding UTF-8 navprofiles
-createdb --owner nav --encoding UTF-8 logger
-createdb --owner nav --encoding UTF-8 arnold
-createlang plpgsql manage
-createlang plpgsql navprofiles
 cd /usr/local/nav/doc/sql
-# Use the nav user password you just made here
+sh createdb.sh -p navdbpassword
-export PGPASSWORD=******
+# Go back to root user
-psql -f manage.sql manage nav
-psql -f types.sql manage nav
-psql -f snmpoid.sql manage nav
-psql -f navprofiles.sql navprofiles nav
-psql -f logger.sql logger nav
-psql -f arnold.sql arnold nav
 exit
 # Configure NAV config file with the nav user password you chose
-sed -e 's/userpw_nav=/userpw_nav=*******/' -i /usr/local/nav/etc/db.conf
+sed -e 's/userpw_nav=/userpw_nav=navdbpassword/' -i /usr/local/nav/etc/db.conf
@@ Line 821: / Line 849: @@
 #
 # First you have to edit the /etc/gammurc file to support your mobile phone
+#
+# Check out the original /etc/gammurc file for hints on different setups
+#
+# Two examples:
 #
@@ Line 838: / Line 870: @@
 #
-# Check out the original /etc/gammurc file for hints on different setups
+# You can now test that the gammu program works by doing this test as root:
-#
-# You can test that the gammu program works by doing this test as root:
 #
 gammu nothing --identify
@@ Line 848: / Line 878: @@
 echo Test | gammu nothing --sendsms TEXT YourMobileNumber
 #
-# and of course change "YourMobileNumber" with the phone number of your mobile :-)
+# Since the NAV program runs as the navcron user it needs permissions to use
-#
+# the /dev/tty* device files. Use this command to give the navcron user the
-# Since the NAV program runs as the navcron user (that was created when installing
+# needed permission:
-# the nav rpm) it needs permissions to use the /dev/ttyS0 device file. Use this
-# command to give the navcron user the needed permission:
 #
 usermod -G uucp navcron
@@ Line 858: / Line 886: @@
 # Now you can test the smsd.py module to see that it will send SMS'es:
 #
+su - navcron
 /usr/local/nav/bin/smsd.py -t YourMobileNumber
-#
+exit
-# Again change "YourMobileNumber" with the phone number of your mobile
@@ Line 871: / Line 899: @@
 mkdir ~/cricket
 cd ~/cricket
-wget http://ans.hsh.no/home/roger/nav3/cricket-1.0.5.tar.gz
+wget http://www.pannekake.net/nav/cricket-1.0.5.tar.gz
 tar xvzf cricket-1.0.5.tar.gz
 ln -s cricket-1.0.5 cricket
@@ Line 935: / Line 963: @@
 # Check the startup by using this command:
 /usr/local/nav/bin/nav status
-# I sometimes have problems starting servicemon and/or pping. I then use this command:
-/usr/local/nav/bin/nav start servicemon pping
-# Maybe even two times to get it going
-# or I stop NAV and start it again this way:
-/usr/local/nav/bin/nav stop
-/usr/local/nav/bin/nav start
 ## Now NAV is up and running and it is time to log in and seed the database.
-## Go to the webpage and log in as admin (remember to change the password)
+## Go to the webpage and log in as admin with password admin (remember to change
-## and go to Toolbox, Edit database
+## the password!) and go to Toolbox, Edit database
 ## Here is a very simple startup that I put on my server. This will
-## NAV, but not stop it on shutdown of the server.
+## start NAV, but not stop it on shutdown of the server.
 ## Use it if you want or make a better one and share it.
@@ Line 963: / Line 984: @@
 ##
 ## As you can see I have put the packages on a local webserver to make it
-## easier to reinstall (don't have to rely on the remote servers being up and
+## easier to reinstall (I don't have to rely on the remote servers being up and
 ## having the same versions available), and you are welcome to download from
 ## that server. But if you want to get the files yourself here are the links:
 ##
 #
-# http://launchpad.net/nav/3.4/3.4.2/+download/nav-3.4.2.tar.gz
+# http://launchpad.net/nav/3.5/3.5.5/+download/nav-3.5.5.tar.gz
 # http://java.sun.com
 # http://gicl.cs.drexel.edu/people/sevy/snmp/source_1.4.2.zip
@@ Line 979: / Line 1000: @@
 # http://www.switch.ch/misc/leinen/snmp/perl/dist/SNMP_Session-1.12.tar.gz
 # ftp://ftp.uninett.no/pub/CPAN/modules/by-module/MD5/GAAS/MD5-2.03.tar.gz
-# ftp://ftp.uninett.no/pub/CPAN/modules/by-module/DB_File/DB_File-1.817.tar.gz
+# ftp://ftp.uninett.no/pub/CPAN/modules/by-module/DB_File/DB_File-1.820.tar.gz
-# ftp://ftp.uninett.no/pub/CPAN/modules/by-module/FCGI/FCGI-0.67.tar.gz
+# ftp://ftp.uninett.no/pub/CPAN/modules/by-module/FCGI/FCGI-0.68.tar.gz
-# ftp://ftp.uninett.no/pub/CPAN/modules/by-module/CGI/CGI.pm-3.40.tar.gz
+# ftp://ftp.uninett.no/pub/CPAN/modules/by-module/CGI/CGI.pm-3.48.tar.gz
 # ftp://ftp.uninett.no/pub/CPAN/modules/by-module/Pg/pgsql_perl5-1.9.0.tar.gz
-# http://initd.org/pub/software/psycopg/psycopg-1.1.21.tar.gz
+# http://www.initd.org/pub/software/psycopg/psycopg-1.1.21.tar.gz
-# http://pypi.python.org/packages/source/I/IPy/IPy-0.62.tar.gz
+# http://www.initd.org/pub/software/psycopg/psycopg2-2.0.13.tar.gz
+# http://pypi.python.org/packages/source/I/IPy/IPy-0.70.tar.gz
 # http://heanet.dl.sourceforge.net/sourceforge/py-rrdtool/py-rrdtool-0.2.1.tar.gz
 # http://heanet.dl.sourceforge.net/sourceforge/pysnmp/pysnmp-2.0.9.tar.gz
-# http://heanet.dl.sourceforge.net/sourceforge/cheetahtemplate/Cheetah-1.0.tar.gz
+# http://heanet.dl.sourceforge.net/sourceforge/cheetahtemplate/Cheetah-2.2.1.tar.gz
-# http://forgethtml.sourceforge.net/forgethtml-cvs-2004-10-21.tar.gz
 # http://heanet.dl.sourceforge.net/sourceforge/forgetsql/forgetSQL-0.5.1.tar.gz
 # http://dl.cihar.com/python-gammu/latest/python-gammu-0.20.tar.gz
+# http://pypi.python.org/packages/source/s/setuptools/setuptools-0.6c11.tar.gz
+# http://pypi.python.org/packages/source/p/pyrad/pyrad-1.2.tar.gz
+# http://www.djangoproject.com/download/1.1.1/tarball/
 # http://heanet.dl.sourceforge.net/sourceforge/cricket/cricket-1.0.5.tar.gz
 #
 </code>

NAV Wiki

User Tools

Site Tools

Differences

Page Tools